ABSTRACT Blackberries have a short post-harvest conservation period, making it necessary to optimize harvest and storage conditions. The objective of this study was to evaluate the impact of refrigerated storage and maturation stage on the physicochemical quality of ‘BRS Cainguá’ blackberries, produced in an organic system. Blackberries from an experimental orchard, were harvested at three ripeness stages (RS), with RS1 being fruits with 100% red skin; RS2 skin 50% red and 50% black; and EM3 100% black skin. The samples were stored in a cold chamber at 4±0.5ºC and 90-95% RH for 12 days. The evaluations were carried out after 0, 3, 6, 9 and 12 days of storage, for: weight loss (WL), soluble solids (SS), pH, titratable acidity (TA), ratio (SS/TA) and color parameters. Blackberries harvested in RS3 had the highest SS content, lowest TA and the highest SS/TA ratio and pH. During storage, TA and WL showed decreasing and increasing linear responses, respectively, regardless of the RS of the fruits. Harvesting based on the skin color of ‘BRS Cainguá’ blackberries influences the physicochemical quality and postharvest conservation. Fruits harvested with 100% black skin, have the best quality and are the most suitable for subsequent refrigerated storage.

Resumo A qualidade do porta-enxerto de nogueira-pecã com segurança genética, fitossanitária e com bom desenvolvimento vegetativo é de suma importância para o sucesso na formação do pomar. O porta-enxerto com vigoroso sistema radicular influencia no crescimento da muda. O objetivo deste trabalho foi avaliar o crescimento do porta-enxerto em função da poda de raiz e de diferentes recipientes para a produção de muda de nogueira-pecã em sistema orgânico. O experimento foi conduzido com o porta-enxerto da cultivar Barton, na área experimental da Embrapa Clima Temperado, Estação Experimental Cascata, nos anos de 2018, 2019 e 2020. Os porta-enxertos foram avaliadas em sacos plásticos, tubetes e diretamente no solo, associado ao manejo da poda de raiz. Avaliaram-se, após 280 e 480 dias do transplante: altura da parte área, comprimento do sistema radicular primário e secundário, diâmetro de caule, área foliar e massa seca da parte aérea e do sistema radicular, e secundárias, e o Índice de qualidade de mudas de Dickson. Verificou-se que o uso do saco plástico para a produção de porta-enxertos de nogueira-pecã enovela as raízes no final do recipiente. Os recipientes e a poda de raiz não afetam o diâmetro do caule, característica importante para a execução da enxertia. Os porta-enxertos de nogueira-pecã com sistema radicular não podado e cultivado em saco plástico desenvolvem maior raiz principal e parte aérea. A poda do sistema radicular da nogueira-pecã, em recipientes e no solo, promove o aumento do número de raízes principais, mas diminui o comprimento das raízes das mudas.

Abstract Quality pecan rootstocks that ensure genetic and phytosanitary safety, besides having good vegetative development, are extremely important to implant a successful orchard. Rootstocks with vigorous radicular systems affect plant growth. This study aimed at evaluating rootstock growth as the result of root pruning and the use of different containers to grow pecan rootstocks in an organic system. The experiment was conducted with “Barton” rootstocks in the experimental area at the Embrapa Clima Temperado in Pelotas, RS, Brazil, in 2018, 2019 and 2020. Rootstocks were evaluated in plastic bags and tubes and in the soil, associated with root pruning. Evaluation 280 and 480 days after transplant comprised the following: height of the aerial part, length of primary and secondary radicular systems, stem diameter, leaf area, dry mass of the aerial part, dry mass of the radicular system, dry mass of secondary roots and the Dickson Quality Index. The use of plastic bags to produce pecan rootstocks was found to coil roots at the bottom of the container. Neither containers nor root pruning affected stem diameter, an important parameter to carry out grafting. Pecan rootstocks with a non-pruned radicular system grown in plastic bags developed large main root and aerial part. Pruning of pecan radicular systems in containers and in the soil leads to increase in the number of main roots but decreases root length.

Abstract Filling materials should be restricted to the root canal space. However, sometimes it is impossible to control the apical extrusion, in this case, the fate of the filling material and the result of the treatment will depend on its physicochemical properties and biocompatibility. Objective To evaluate the tissue response and bone repair capacity of endodontic sealers that were implanted in the calvaria of Wistar rats, forming the groups (n=16): AH Plus and Sealer Plus, compared to the clot group. Methodology On days 30 and 60, the animals were euthanized, the calvaria was removed and processed for hematoxylin-eosin, immunohistochemistry for collagen type I, Picrosirus red and microtomographic analysis. Data were subjected to ANOVA and Tuckey tests (p<0.05). Results At 30 days, all groups showed an intense inflammatory reaction (p>0.05). At 60 days, the AH Plus and Sealer Plus maintained an intense inflammatory infiltrate compared to the clot group (p<0.05). We observed immunopositive areas for type I collagen in all groups at 30 days and 60 days (p>0.05). We observed more red collagen fibers for the Sealer Plus compared to the clot group at 30 days (p<0.05). Considering the total fibers, the clot group at 30 days compared to 60 days after surgery showed an increase in the amount of matrix (p<0.05). There were no statistical differences between groups for green and yellow fibers (p>0.05). Regarding morphometric parameters, at 30 days, the newly formed bone volume and number of bone trabeculae were higher in the groups with sealers compared to the clot group (p<0.05). At 60 days, AH Plus and Sealer Plus showed greater bone neoformation compared to the clot group (p<0.05). Conclusions Despite AH Plus and Sealer Plus induced an intense inflammatory reaction, they can be considered biocompatible materials, since they allowed bone repair.

The aim of this study was to evaluate the ability of gutta-percha and a thermoplastic synthetic polymer (Resilon) to fill simulated lateral canals, using warm vertical compaction. Forty-five single-rooted human teeth were prepared using the rotary crown-down technique. Artificial lateral canals were made at 2, 5, and 8 mm from the working length (WL) in each root. The specimens were divided into three groups (n = 15), according to the filling material: Dentsply gutta-percha (GD), Odous gutta-percha (GO), and Resilon cones (RE). The root canals were obturated using warm vertical compaction, without endodontic sealer. The specimens were subjected to a tooth decalcification and clearing procedure. Filling of the lateral canals was analyzed by digital radiography and digital photographs, using the Image Tool software. The data were subjected to the Kruskal-Wallis and Dunn tests at 5% significance. RE had the best filling ability in all root thirds (p < 0.05), with similar results for GO in the coronal third. In the middle and apical thirds, GD and GO had similar results (p > 0.05). Resilon may be used as an alternative to gutta-percha as a solid core filling material for use with the warm vertical compaction technique. The study findings point to the potential benefit of the warm vertical compaction technique for filling lateral canals, and the study provides further information about using Resilon and gutta-percha as materials for the warm vertical compaction technique.

Inaugurada em 2006, a Usina Hidrelétrica de Irapé possui a mais alta barragem do país, com 210 m, que vem sendo monitorada pelo Observatório Sismológico da Universidade de Brasília desde o começo do enchimento de seu reservatório. Apresentando sismicidade causada pelo aumento da tensão crustal logo após o início do represamento, a Sismicidade Desencadeada por Reservatório da Usina Hidrelétrica de Irapé permanece como um importante objeto de estudo para o entendimento deste fenômeno. O presente trabalho se propôs a estudar a sismicidade registrada de janeiro a maio de 2006, assim como a caracterizar a geologia ao redor da Usina Hidrelétrica de Irapé com o intuito de identificar e descrever as estruturas que permitam melhor compreender os eventos sísmicos. A orientação espacial dos eventos sísmicos obtidos pela análise das polaridades e da forma de onda condiz com aquelas dos lineamentos de relevo. As estruturas encontradas podem ser associadas a uma maior, de direção principal NE/SW, com dezenas de quilômetros, que seria responsável pela captura dos rios Jequitinhonha e Araçuaí, interpretada neste trabalho como uma estrutura relacionada a uma fase tardia do Evento Brasiliano. O diagrama de solução do mecanismo focal gerado utilizando um método de inversão da forma de onda no domínio do tempo indica que a direção dos possíveis planos de falhas está correlacionada ao principal direcionamento das estruturas rúpteis na área de trabalho.

Inaugurated in 2006, the Irapé Hydroelectric Plant has the highest dam in Brazil, with 210 m. The Seismological Observatory of the University of Brasilia is monitoring this structure since the beginning of its reservoir filling. The reservoir triggered seismicity caused by the increase of crustal tension just after the start of the remains like an important object of study for understanding this phenomenon. This paper aims at studying the seismicity recorded from January to May 2006, as well as to characterize the geology around the Hydroelectric Plant Irapé in order to identify and describe the structures that help for better understanding the seismic events. The spatial orientation of the seismic events obtained by analyzing polarity and waveform is consistent with the guidance of prominent relief lineaments. These faults can be found attached to a larger structure with main NE/SW direction and tens of kilometers, which would be responsible for capturing Jequitinhonha and Araçuaí rivers. This great lineament is interpreted herein as a structure related to a late stage of the Brasiliano-Panafrican event. The solution of focal mechanism, created using an inversion method of the waveform in the time domain, indicates that the direction of the possible plans are correlated to main failure of brittle structures targeting the area of work.

O objetivo deste estudo foi avaliar a efetividade de 3 solventes em 2 tipos de guta-percha e no Resilon. Os materiais avaliados foram: guta convencional (Endo points), guta termoplastificada (Endo points TP) e cones de Resilon (RE). Amostras circulares medindo 10 mm de diâmetro e 1 mm de espessura foram preparadas, sendo mantidas a 37°C por 48 h. Cada amostra, com o anel metálico, foi pesada em uma balança de precisão a cada 24 h até estabilização da massa, quando a massa inicial era determinada. As amostras (n=7) foram imersas, então, nas soluções solventes avaliadas (eucaliptol, óleo de laranja, e xilol). Após 48 h a 37ºC, as amostras foram pesadas outra vez a cada 24 h, até a estabilização (massa final). A diferença entre a massa final e inicial determinou a capacidade solvente de cada material. Os dados foram submetidos à análise de variância em nível de significância de 5% e teste de Tukey. Os resultados demonstraram que o xylol foi mais eficaz solvente, especialmente na guta convencional e no Resilon (p<0,05). O eucaliptol e o óleo de laranja foram mais eficazes sobre a guta thermoplastificada em relação aos outros materiais obturadores (p<0,05). Conclui-se que todas as substâncias testadas apresentam ação solvente, contudo, o xilol foi o mais efetivo sobre a guta-percha ou Resilon.

The aim of this study was to evaluate the effectiveness of 3 solvents (eucalyptol, orange oil, and xylol) on 2 types of gutta-percha (conventional and thermoplastic) and Resilon. Specimens (10 mm diameter x 1 mm thick; n=7 per condition) were prepared and maintained at 37ºC for 48 h. Each specimen was weighed on a precision scale every 24 h until its mass was stable, at which time the initial mass was determined. Specimens (n=7) were then immersed in the solvent solutions and, after 48 h at 37ºC, they were reweighed at 24- h intervals, until stabilization (final mass). The difference between the final and the initial mass determined the solvent capacity of each solvent. Data were subjected to analysis of variance and Tukey's test at 5% significance level. The results demonstrated that xylol was the most effective, especially on conventional gutta-percha and Resilon (p<0.05). Eucalyptol and orange oil were more effective on thermoplastic gutta-percha than the other materials (p<0.05). It was concluded that all evaluated substances presented solvent action, but xylol was the most effective on both gutta-percha or Resilon.

The purpose of this study was to evaluate the radiopacity of 5 root-end filling materials (white MTA-Angelus, grey MTA-Angelus, IRM, Super EBA and Sealer 26). Five specimens (10 mm diameter X 1 mm thickness) were made from each material and radiographed next to an aluminum stepwedge varying in thickness from 2 to 16 mm. Radiographs were digitized and the radiopacity of the materials was compared to that of the aluminum stepwedge using VIXWIN 2000 software in millimeters of aluminum (mm Al). Data were analyzed statistically by ANOVA and Tukey's test at 5% significance level. Radiopacity values varied from 3 mm Al to 5.9 mm Al. Sealer 26 and IRM presented the highest radiopacity values (p<0.05), while white/grey MTA and Super EBA presented the lowest radiopacity values (p<0.05). The tested root-end filling materials presented different radiopacities, white/grey MTA and Super EBA being the least radiopaque materials.